MAX 1 Commercial Reversing Aid - Integrated with 1 Camera System


This Kit takes two of our best selling products and combines them into a single integrated vehicle reversing aid solution.

The MAX 1 is a heavy duty vehicle reversing system specifically designed for commercial vehicles.

This system is equipped with stainless steel sensors and a heavy duty weatherproof control box which can withstand harsh weather conditions without any problems. The system warns the driver or operator with a beeping sound indicating potential obstacles are at the rear of the vehicle and then a clear voice "TELLS" the operator the countdown of the remaining distance in feet as the vehicle reverses. The device is activated when the driver puts the vehicle into reverse. Acoustic sensors installed at the rear of the vehicle will transmit a modulated beam signal that is capable of seeing day or night. When the signal strikes a solid object, it bounces back to the sensor and instantaneously sends a detecting signal to the microprocessor.

The Max 1 is integrated with our Heavy Duty reverse camera kit with the 7 inch monitor and night vision camera. The wiring harness from the Max 1 has been modified to use the audio wire in the camera cable and bring the audio output from the Max 1 into the speaker in the monitor. This makes for a clean installation, eliminating the standard Max 1 speaker.

The 7 inch monitor comes standard with a heavy duty dash mount bracket, however we do have an optional windshield mount as well. This monitor has a built-in controller with 2 AV inputs and is capable of handling two cameras. When two (2) cameras are used, AV1 is on all the time unless reverse is engaged, then the AV2 camera is displayed. This kit comes standard with one camera but an optional second camera could be added by ordering SP70C203.


•Additional Cable in Lengths of 5m (16ft), 10m (33 ft) or 20m (66ft)
•Windshield Stem mount for monitor
•Pedestal Dash Mount

•Heated Camera – to reduce condensation – triggers at 50°

•Swivel Brackets for sensor mounting

Voice Distance Indication Long Range Detection of 12 feet
Blind Area Alerting Close Range Detection of 12 inches
Sonar Sensor Technology Heavy Duty Stainless Sensors
VDI plays from camera monitor Designed for Extreme Weather Conditions
Speaker Is Not Needed Integrated With One Backing Camera

General Specifications   Physical Specifications  
Sensors   Dimensions  
4  Acoustic, Heavy Duty, Stainless Steel, Weatherproof
  Processor  4.25 in x 2.83 in x 1.23 in
    Sensor  0.82 in Diameter x 0.51 in
Dimension 8mm diameter X 5mm
Frequency  Transmits at 32.0 kHz

Detecting Angles   Cable Length  
Horizontal Approximately 30 Degrees Sensor Cables
10 ft
Vertical Approximately 50 Degrees Power Wires
6 ft
Detection Range 12 in - 12 ft



Type LCD Monitor Speaker

Power Specifications   Environmental Specifications  
Input 11-15 Volts DC Operating Temperature 122°F to -4°F
Operating Voltage 3.0 W    
Monitor Specifications   Camera Specifications  
Panel TFT LCD (Digital) Sensor 1/3" - 1/4" Color CCD
Screen Size 7 in Resolution(TV LINES) 720TVL / 420TVL
Resolution 800*480 View Angle 120°
Signal System PAL/AUTO/NTSC Effective Pixels 510*492
Brightness 300cd/m2 TV System NTSC Color
Aspect Ratio 16:9 Minimum Illumination 0.1 Lux, 0 Lux with IR Night Vision
Video Input (2-Way)
AV1-DVD, etc. AV2-Camera Video Output Color video out: 1.0vp - p75(ohm) load
    Built-in Microphone Yes
    Parking Line Option On/Off No
Power Specifications   Power Specifications
Power Supply DC 12-24V Power Consumption <3W
    Operating Voltage DC 12V (+/-10%)
    Environmental Specifications  
    Operating Temperature -22F to 158F 
    Storage Temperature -40F to 176F 
    Vibration Rate  10G 
    Waterproof  IP68

Customer Reviews
(0  reviews)
Average Rating: 0  Stars

How Can We Help?

If you have any questions about our vehicle safety & management solutions, give us a call at 1-623-209-0086

Get in touch

Call Us - 623.209.0086
Fax Us - 623.209.0088
Mail Us -
VRS Fleet Products
4021 N 31st Ave, Phoenix, AZ 85017

About Our Company

VRS Fleet Products was created to offer our talking (VDI)vehicle reversing aids to business with fleets large and small with a wide range of vehicles. We started with vehicle reversing aids and now offer many different fleet safety products in categories such as vehicle obstacle detection, reversing and surveillance IP DVR and dash cameras, parking sensor systems, and third brake light rear collision pulse technology.

Follow Us


Installer Up-fitter Login
Dealer Login